EN
CN
UV Preconditioning Chamber
Product description
Specifications
Download
Meet the UV preconditioning test requirements specified in the 4.10 clause of the IEC 61215-2016 standard and the standard MST54 of the IEC 61730-2016 standard. Specially designed UV metal halide lamps are used to test of photovoltaic products and materials.
l Temperature of lamp could be by cooled down in closed chamber which is cooled by water cooling chiller .
l Module temperature could be controlled by water cooling chiller with cooling air blowing the module.
l UV metal halide lamps are used with high value performance, low test cost.
l The irradiance of each UV lamp can be controlled separately to adjust the irradiance of each lamp.
l During the test, the UV irradiance data can be tracked. After the irradiation reaches the requirement, the test can be stopped automatically.
l With the power off memorizing function, which could accumulate on the data before power off.
l Real-time curves of UVA & UVB radiation, temperature of module could be showed on the display and history curves could be accessed.
l Data of UVA & UVB radiation, temperature of module could be could be memorized in the hard disc of the IPC as EXCEL format.
Item | Parameters |
Uniformity of irradiation surface | ≤15% |
Spectral range | 280nm～400nm |
UV irradiance(280nm-400nm) | 150～250W/m2 |
UVB ratio | 3%～10% |
UVA Radiometer Range | 0～300W/m2 |
UVA Radiometer accuracy | ±3% |
UVB Radiometer Range | 0～50W/m2 |
UVB Radiometer accuracy | ±3% |
Temperature of the module | 60±5℃ |
Temperature accuracy | ±2℃ |
Temperature repeatability | ±0.5℃ |
Lamp area air temperature | 25±5℃ |
Temperature quantity | 2 |
Light Area | 2200 *1200 mm |
- File name Release date Ooperating
- IEC 61730-2 2018-04-16 Download
- IEC 61215 2018-04-16 Download
